Posts Tagged ‘Baitcasting Reels’

Shimano Reels Instruction Manuals

June 12th, 2011 by admin | No Comments | Filed in Shimano Reels

Instruction Manuals for Shimano Reels

All of the below Instruction Manuals are in PDF format you will need adobe reader to access them.Shimano Reels Instruction Manuals

To download FREE adobe reader Click here.

The Instruction Manuals can also be saved to your computer or printed out, you are able to do this from inside the manual itself.

Instruction Manuals for Conventional Reels

Instruction Manuals for Round Baitcasting Reels

Instruction Manuals for Spin & Offshore Spin Reels

If you have any problems accessing the above instruction manuals let us know.

Thanks to shimano.com for the above instruction manuals.


Tags: , , , , , , , , , , , , , , , , , , , , , , ,

3 ways to stop getting birds nests using a baitcasting reel

March 4th, 2011 by admin | No Comments | Filed in Low Profile Baitcasting Reels

birds nests on your baitcasting reel is no fun

When using a baitcasting reel, the main issue that newcomers have is casting – if you dont do it right, you might get some backlash which in turn will lead to birds nests in your line.

birds nests over-run

There is a lot to learn about casting and bird nests happen due to a problem in your cast. Usually, it is where there is too much  line coming off the spool. Quite simply, you want the spool to stop with the lure and you will learn this with experience.

There are a number of things you can do to prevent birds nests from happening;

1. Use your thumb to control the spool Learning how to control the spool is a big part of casting. You can practice casting in a field or other large area and dont need to be where there is water. You should start by making sure that the tension is set so that when the lure hits the ground, the spool turns no more than a quarter turn. Keep on casting to learn how to control your spool – use your thumb to stop it feeding the line by pressing down on rim once the lure has stopped.

2. Buy a reel to fit your hands, good thumb control is highly important so you should take some time to buy a good quality baitcasting reel. A higher price doesnt always mean better and ergonomics will play an important part in your decision. You can always look at upgrading once you have mastered this.

3. Make sure the rod tip follows the lure

After casting, you should keep the rod tip pointing in the trajectory that the lure is following; if you drop the tip before or when the lure hits the water then you might find that extra line is being spooled off, even though the lure has stopped. This can also cause bird nests. This can also happen if you move your wrist too much after you have cast.

Using a baitcasting reel is a fun and rewarding experience With a some practice, you can easily avoid the problem of birds nests when you cast. You shouldn’t let this put you off and these 3 tips should serve as a good starting point.

Say goodbye to Birds nests on your Shimano low profile baitcasting reel.

 


Tags: , , , , , , , , , , , , , , , , , , , ,

Ways to clean baitcasting reels

October 31st, 2010 by admin | No Comments | Filed in Round Baitcasting Reels

Put a Shine your Baitcasting Reels

It can seem like a lot of effort cleaning baitcasting reels after each fishing trip. However, many faults that occur can often be blamed on the fact that it has corroded as it was not maintained correctly. It may not even be a fault and instead merely underperforms compared to its brand new state. This is an anglers most frustrating problem. Even more so if it is one of their favourite baitcasting reels that has been affected.

Preparing your fishing trip however should incorporate a full cleanse of your tackle and equipment, and the most important is probably your fishing reel. A good reel should last you for a long time due to the quality construction, however, like any mechanical device it also needs to be looked after.

3 quick tips,will help to keep your baitcasting reels in good condition.

The first thing you need to do is to take the reel off the rod, and then remove the handle – In most cases, just unwind the handle as they have a reverse locking system. When you have done that, take a damp cloth and wipe over the bits of the reel that you can see. When you do so, be sure that you use clean water and especially not salt water as this will corrode inside.

Depending on the baitcasting reels you have you will then need to remove the sideplate. Some of them unclip, or unwind while others are screwed in place – you should consult the manual if you are unsure. Then its just a case of removing any dirt with a swab and picking out any other debris that may have found its way inside. Apply some bearing grease, or WD40 to the bearings and gears while you are inside as well to keep them fresh as this is one of the main causes of reel failure. When you have done this part, put the sideplate back on.

Before reattaching the handle, give it a good wash too. Its likely to be covered in dirt, bait and a whole lot more!. In most cases, a rinse with water will be fine but if it is very mucky then wash it when you get in with soapy water.

As demonstrated in this article, it really doesnt take much to keep your reel clean after you have used it and it is going to last so much longer. The next time a reel plays up in the middle of your retrieve then perhaps its time to start looking at your maintenance routine. Fishing reels, especially some baitcasting reels, are not cheap, so look after them.


Tags: , , , , , , , , , , , , , , , , , , , ,