Archive for the ‘Shimano Reels’ Category

The Talica Story: Castability, Power, Drag, Compact

November 8th, 2011 by admin | No Comments | Filed in Shimano Reels

Shimano Talica A Reel Beast

#1 Castability
Reels with heavy spools spin for minutes on the counter of your local tackle store but how that translates to fishing is another story. And while we are Talica one of the new 2011 reelsusing extremely high grade greaseless ball bearings that don’t flex under sideload for unbelievable freespool, a truly light weight spool for casting small livebaits such as Anchovies and Sardines is a must. So we aggressively machine the spool to maximize weight savings while maintaining strength. We also created a way to minimize drag created by water between the spool and the frame. ‘Chovies and ‘Dines are very light, and traditionally, to cast these baits, good anglers would “bump” the spool during the cast to get the spool moving and avoid the bait from flying out, then suddenly getting jerked down by line not coming off of the spool and slapping hard on the surface of the water. We took this one step further in defining the ability of Talica to cast well to mean underhand to enhance bait persentation. Now that the chum line will not be unattainable even when casting underhand, imagine how much further overhand will get you.
#2 Power
Cranking force is a hard thing to explain until you are handed a reel with the fish on the other end. The use of High Efficiency Gears in high and low speeds sets Talica apart from all reels currently offered in the market. The incredible power in low and in high is what makes Talica a joy to battle big fish with. No longer will you have to decide between power in low gear or speed in high gear. Talica is the best of both worlds and lets you save your energy for hoisting that cow up for a photo!
#3 Drag
A smooth drag is very important and one that Shimano prides itself upon throughout the product line. Talica is no exception to this rule. However, being able to fish 3 or 4 line classes heavier than you would normally on a reel of its size makes Talica more fun to fish since you spend a lot less time fighting your tackle and more time fighting the fish. Even the smallest Talica, TAC8II, will fish 50# PowerPro with ease!
#4 Compact
When you first lay your eyes on a Shimano Talica it’s intriguing. When you feel what it’s capable of it’s amazing! An incredible amount of testing for ergonomics went into the design process of this reel and the feel of it confirms this. (We went through over 5 different gearbox angles and shapes before we were happy with it!)

Don’t let Talica’s small stature and lightweight fool you, the Talica is a reel beast!


Tags:

NEW 2011 Reels

October 20th, 2011 by admin | No Comments | Filed in Shimano Reels

NEW 2011 Reels by Shimano

new 2011 reels. CronarchChronarch Low Profile Baitcasting Reel.
The Professionals Choice
of the NEW 2011 Reels.
HEG® Gearing developing incredible power and torque
Available in multiple gear ratios to cover entire applications
New modern compact design and appearance that ties in perfectly with new Crucial® rods.
SPECS
• Aluminum Frame
• Lightweight Graphite Sideplates
• Recessed Reel Foot
• High Efficiency Gearing (HEG®)
• Super Free Bearing Supported Pinion Gear System (SF®)
• A7075 Aluminum Magnumlite™ Spool
• Dartainium® 2 Drag Washer B
• 7 Bearings
• 5 Shielded Stainless Steel BB
• 1 S A-RB® BB
• 1 A-RB® Roller Clutch Bearing
• Variable Brake System (VBS®) with Reduced Mass Hub
• Super Stopper® II
• Assist Stopper
• Drilled Handle Shank
• Septon PV Power Grips
• Titanium IP Line Guide
• 1/8 Turn Easy Access Attached Sideplate
• Metal Cast Control Knob
• Double Anodized Spool and Handle
• Disengaging Levelwind System
• QuickFire II® Clutch Bar
• Made in Japan

new 2011 reels. Curado

NEW 2011 Reels

Low Profile Baitcasting Reel.

Two Decades of Performance & Reliability
HEG® Gearing developing incredible power and torque
Available in multiple gear ratios to cover entire applications
Advanced ergonomic design with new two tone coloring for the ideal match to Compre® rods.
SPECS
• Aluminum Frame
• Lightweight Graphite Sideplates
• Recessed Reel Foot
• High Efficiency Gearing (HEG®)
• Super Free Bearing Supported Pinion Gear System (SF®)
• A7075 Aluminum Magnumlite™ Spool
• Dartainium® Drag
• 5 Bearings
• 4 Shielded Stainless Steel BB
• Roller Clutch Bearing
• Variable Brake System (VBS®) with Reduced Mass Hub
• Super Stopper®
• Assist Stopper
• Septon PV Power Grips
• 1/8 Turn Easy Access Attached Sideplate
• Metal Cast Control Knob
• Anodized Spool and Handle
• Disengaging Levelwind System
• QuickFire II® Clutch Bar

 

new 2011 reels.Citica

Low Profile Baitcasting Reel.

Reliability & Innovation for All Anglers from the NEW 2011 Reels.
HEG® Gearing developing incredible power and torque
Available in multiple gear ratios to cover entire applications
Advanced ergonomic design with new two tone coloring for the ideal match to Clarus® rods
SPECS
• Aluminum Frame
• Lightweight Graphite Sideplates
• Recessed Reel Foot
• High Efficiency Gearing (HEG®)
• Super Free Bearing Supported Pinion Gear System (SF®)
• Lo-Mass Drilled Spool System
• Dartainium® Drag
• 4 Bearings
• 3 Shielded Stainless Steel BB
• Roller Clutch Bearing
• Variable Brake System (VBS®) with Reduced Mass Hub
• Super Stopper®
• Assist Stopper
• 1/8 Turn Easy Access Attached Sideplate
• Metal Cast Control Knob
• Anodized Spool and Handle
• Disengaging Levelwind System
• QuickFire II® Clutch Bar

 

 

 NEWnew 2011 reels Caius2011 Reels

Low Profile Baitcasting Reel.

With a bold appearance and easy-to-operate and easy-to-learn features, Proven Baitcasting reel quality and dependability in the new Caius 200 and left-hand retrieve 201. Both reels are made for those anglers wanting to step up to the fishing benefits of a low-profile casting reel.

Caius is offered with Shimano’s new “Easy Mag II” Braking System – a magnetic cast control that allows for a true freespool setting. With Easy Mag II, the spool controlling magnets rotate to face each other, cancelling themselves so they apply zero force on the spool.
Anglers can continue to turn down the magnetic control to provide better freespool and more casting distance more control from the NEW 2011 Reels.

“It’s Shimano quality, Shimano design, Shimano manufactured,”

SPECS

• Aluminum Lo-Mass® Spool System
• Super Stopper®
• High Speed 6.5:1 Retrieve
• 3 Shielded Stainless Steel Ball Bearings
• New “Easy MAG II” Brake system
• Disengaging Levelwind System
• Quickfire® II Clutch Bar
• Drilled Handle Shank
• Ceramic Line Guide
• Recessed Reel Foot
• Rated for use with Mono, Fluorocarbon and PowerPro® lines
• Approved for use in Saltwater


new 2011 reels.sustain
Spinning Reel
Refined to Specific
X-Ship provides rigidity and tremendous amount of cranking power
New Magnumlite CI4 Rotor reduces resistance on rotation provides tremendous amount of smoothness
Rapid Fire Drag allows Anglers to quickly adjust Drag to ideal setting daring the fight

SPECS

• X-Ship

• New “Magnumlite CI4 Rotor” (1000-4000)
• Aluminum Sideplate
• Rapid Fire Drag
• New “Reel Stand”
• Paladin® Gear Durability Enhancement
• Propulsion® Line Management System
Propulsion® Spool Lip
SR® One-Piece Bail Wire
Power Roller® III
S®- Arm Cam
• Aerowrap® II Oscillation
• SR® Concept
SR® 3D Gear
SR® One-Piece Bail Wire
7 S® A-RB (Shielded A-RB) Ball Bearings (1000)
8 S® A-RB (Shielded A-RB) Ball Bearings (2500-5000)
• Aluminum Spool
• S® – Concept
S®-Rotor
S®- Guard
S®- Arm Cam
• New Machined Aluminum Handle
• Direct Drive Mechanism (Thread-In Attachment)
• EVA Handle Knob
• WP Drag (Waterproof Drag)
• Maintenance Port
• Fluidrive® II
• Floating Shaft
• Dyna-Balance®
• Super Stopper® II
• Repairable Clicker
• Approved for use in Saltwater
• Rated for use with Mono, Flruoro and PowerPro® lines
new 2011 reels Stradic

Spinning Reel

My personal favourite of the NEW 2011 Reels.

Classic Look, More Power
X-Ship provides rigidity and tremendous amount of cranking power

SPECS

• X-Ship
• Aluminum Rotor, Sideplate
• Paladin® Gear Durability Enhancement
• Propulsion® Line Management System
Propulsion® Spool Lip
SR® One-Piece Bail Wire
Power Roller® III
S®- Arm Cam
• Aerowrap® II Oscillation
• SR® Concept
SR® 3D Gear
SR® One-Piece Bail Wire
5 S® A-RB (Shielded A-RB) Ball Bearings
• Aluminum Spool
• S® – Concept
S®-Rotor
S®- Guard
S®- Arm Cam
• New Machinede Aluminum Handle
• Direct Drive Mechanism (Thread-In Attachment)
• WP Drag (Waterproof Drag)
• Maintenance Port
• Fluidrive® II
• Floating Shaft
• Dyna-Balance®
• Super Stopper® II
• Repairable Clicker
• Approved for use in Saltwater
• Rated for use with Mono, Flruoro and PowerPro® lines
new 2011 reels TalicaPower Beast to Next Level
Most Popular NEW 2011 Reels
Max drag of 60 lbs. with Freespool
West Coast Rail Standing Special
Castable Design
Fly-lining live baits. Catching big fish on small leverdrags. Common sense says that this is an oxymoron. Star Drags are better casters by nature. They have lighter spools because the drags are in the gears, not the spool. Lever Drags tend to have more power in the drag system because their washers are so much larger.With Talica 2-Speeds we set out to break the mold. We wanted to make a 2-Speed Leverdrag that could underhand a sardine 40 feet to the chum line with ease. We also wanted to increase the fishable drag capabilities of a small diameter reel to fish with heavy PowerPro and short Fluorocarbon top shots that anglers are using to land huge fish.We also know, from our successes with HEG (High Efficiency Gearing) in our Star Drag reels, that we could make the ultimate 2-Speed: one with fast line pickup compared to traditional 2-speeds but with unbelievable crank power in either gear ratio. So when you drop it into low on a circling Tuna at deep color, instead of gaining a couple inches, you are gaining around 2 feet. More power with the NEW 2011 Reels.
SPECS
• Compact, High Speed, Castable Leverdrag with High Capacity
• E.I. Surface Treatment for extreme corrosion protection
• 2 year warranty with online
registration
• One-Piece, Forged and Machined
Aluminum Frame with E.I.
• Machined Aluminum Handle-Side
Forged Sideplate with E.I.
• Forged, Machinede Aluminum
Spool with E.I.
• 2-Speed HEG®
(High Efficiency Gearing)
• 6 S A-RB® (Shielded A-RB Bearings)
• Lightweight Spool with
Support Bearings for excellent Freespool
• Removable Harness Lugs
• Topless Design
• Oversized Carbon Drag Washer for Ultra-High Drag Pressures
• Waterproof Drag (when engaged)
• Silent Triple-Pawl Anti-Reverse
• Ergonomic Power Handle
• Ratcheting Drag Lever
• Preset Knob with Click
• Clicker
• Aluminum Rod Clamp
• Approved for use in Saltwater
• Rated for use with Hollow-Ace™, PowerPro® and Mono lines

 We can only wonder if Shimano aim to release any more NEW 2011 Reels.

Tell us what you think about the Shimano NEW 2011 Reels.


Tags: ,

Shimano Thunnus CI4

July 29th, 2011 by admin | No Comments | Filed in Shimano Reels

The hard fighting Shimano Thunnus CI4

Thunnus, the genus or name for the hard fighting Tuna; or in this case a heavy duty all metal body spinning reel with our reowned Baitrunner function. Everything about this reel has been built extra tough for heavy duty saltwater use. The Thunnus CI4 features a full metal jacket construction, with an aluminium frame, rotor, side-plate and Cold Forged Spool. This construction not only makes the Thunnus CI4 extremely tough, but it also helps resists flex under pressure and keeps all the internal components in perfect alignment to maximize cranking efficiency and power. The Baitrunner system allows you to set a secondary drag to allow finicky fishes to “run” with the bait without spitting out the hook. The Thunnus CI4 is equipped with ARB to resist corrosion and it also comes with Fluidrive drive train, dyna balance rotor balancing system, Power Roller II and a waterproof drag system for all your saltwater battles. So the next time you pitch a livebait into a rampaging school of tuna, be sure you are equipped with one of the best Shimano Offshore Spinning Reels a Thunnus CI4 reel.

Features: Thunnus CI4

  • Lightweight CI4 Frame and Rotor (AL on 12000)Shimano Thunnus CI4
  • Aluminum Sideplate
  • Paladin Gear Durability Enhancement
  • Propulsion Line Management System: Propulsion Spool Lip, SR One-Piece Bail Wire, Power Roller III. Redesigned Bail Trip, S-Arm Cam
  • Varispeed Oscillation
  • S-Concept, S-Rotor, S-Arm Cam, Direct Drive Mechanism (Thread-In Handle Attachment), Oversized Septon Grips for Power and Comfort, WP Drag (Waterproof Drag)
  • Machined Aluminum Handle
  • Dartainium II Drag Washers (Cross Carbon)
  • Repairable Clicker
  • S A-RB (Shielded A-RB) Ball Bearings
  • Super Stopper II Anti-Reverse
  • Dyna-Balance
  • Floating Shaft
  • Fluidrive II Gearing
  • Approved for use in Saltwater
  • Rated for use with Mono, Fluorocarbon and PowerPro lines

Shimano is well known for their excellence in gearing and this is evident with the Thunnus CI4 as well. The Paladin Gear Durability Enhancement uses a cold forged aluminium drive gear with a hardened brass pinion gear. This is said to make that out-of-the-box smoothness last much longer than reels with conventional gearing; even those that use an all-stainless steel drive-train.

Straight from the box the  Thunnus CI4 feels light and very smooth. It also looks amazing when it catches the light. The Septon grip handle is non skid and comfortable to hold. Coupled to the machined handle the reel definitely feels robust enough to back up the 10 kilo drag capability.

If you’re in need of a threadline reel that you can freespool baits to hard fighting, long running pelagics we recommend you have a serious look at Shimano’s Thunnus CI4 range.


Tags: , , ,